Center Drills
Available151 products
Center drills consist of a pilot drill and a countersink. They are used to create holes at the center of a piece of stock so it can be turned between centers on a lathe in metalworking applications. The pilot drill creates a small hole in the stock and the countersink expands the hole, leaving a small gap at the bottom of the hole that helps protect the lathe's centers from damage when the stock is turned on it.
Finish - Machining
High-Speed Steel Center Drills with Plain Tip
High-speed steel center drills provide good wear resistance in a wide range of machining applications. Center drills with a plain tip are the standard choice for creating center holes in a piece of stock to prepare it for turning between centers on a lathe.
High Speed Steel + 60 ° Included Angle + Left Hand Cut + Double End
High-Speed Steel Center Drills with Plain Tip High Speed Steel + 60 ° Included Angle + Left Hand Cut + Double End, sorted by Drill Size, custom
Loading... |
High Speed Steel + 60 ° Included Angle + Right Hand Cut + Double End
High-Speed Steel Center Drills with Plain Tip High Speed Steel + 60 ° Included Angle + Right Hand Cut + Double End, sorted by Drill Size, custom
Loading... |
High Speed Steel + 82 ° Included Angle + Right Hand Cut + Double End
High-Speed Steel Center Drills with Plain Tip High Speed Steel + 82 ° Included Angle + Right Hand Cut + Double End, sorted by Drill Size, custom
Loading... |
High Speed Steel + 90 ° Included Angle + Right Hand Cut + Double End
High-Speed Steel Center Drills with Plain Tip High Speed Steel + 90 ° Included Angle + Right Hand Cut + Double End, sorted by Drill Size, custom
Loading... |
Carbide Center Drills with Plain Tip
Solid carbide center drills provide excellent wear resistance when machining the toughest materials, such as cast iron and stainless steel. Center drills with a plain tip are the standard choice for creating center holes in a piece of stock to prepare it for turning between centers on a lathe.
Carbide + 60 ° Included Angle + Right Hand Cut + Double End
Carbide Center Drills with Plain Tip Carbide + 60 ° Included Angle + Right Hand Cut + Double End, sorted by Drill Size, custom
Loading... | ||||||
Loading... |
Carbide + 60 ° Included Angle + Right Hand Cut + Single End
Carbide Center Drills with Plain Tip Carbide + 60 ° Included Angle + Right Hand Cut + Single End, sorted by Drill Size, custom
Loading... |
Carbide + 82 ° Included Angle + Right Hand Cut + Double End
Carbide Center Drills with Plain Tip Carbide + 82 ° Included Angle + Right Hand Cut + Double End, sorted by Drill Size, custom
Loading... |
Carbide + 90 ° Included Angle + Right Hand Cut + Double End
Carbide Center Drills with Plain Tip Carbide + 90 ° Included Angle + Right Hand Cut + Double End, sorted by Drill Size, custom
Loading... |
Extended Length Center Drills with Plain Tip
Extended-length center drills are longer than standard center drills and can access hard-to-reach workpieces. These center drills have a plain tip, which is the standard choice for creating center holes in a piece of stock to prepare it for turning between centers on a lathe.
Carbide + 60 ° Included Angle + Right Hand Cut + Double End
Extended Length Center Drills with Plain Tip Carbide + 60 ° Included Angle + Right Hand Cut + Double End, sorted by Drill Size, custom
Loading... |
Carbide + 82 ° Included Angle + Right Hand Cut + Double End
Extended Length Center Drills with Plain Tip Carbide + 82 ° Included Angle + Right Hand Cut + Double End, sorted by Drill Size, custom
Loading... |
Carbide + 90 ° Included Angle + Right Hand Cut + Double End
Extended Length Center Drills with Plain Tip Carbide + 90 ° Included Angle + Right Hand Cut + Double End, sorted by Drill Size, custom
Loading... |
Cobalt + 60 ° Included Angle + Right Hand Cut + Double End
Extended Length Center Drills with Plain Tip Cobalt + 60 ° Included Angle + Right Hand Cut + Double End, sorted by Drill Size, custom
Loading... | ||||||
Loading... |
High Speed Steel + 60 ° Included Angle + Right Hand Cut + Double End
Extended Length Center Drills with Plain Tip High Speed Steel + 60 ° Included Angle + Right Hand Cut + Double End, sorted by Drill Size, custom
Loading... | ||||||
Loading... |
High Speed Steel + 82 ° Included Angle + Right Hand Cut + Double End
Extended Length Center Drills with Plain Tip High Speed Steel + 82 ° Included Angle + Right Hand Cut + Double End, sorted by Drill Size, custom
Loading... |
High Speed Steel + 90 ° Included Angle + Right Hand Cut + Double End
Extended Length Center Drills with Plain Tip High Speed Steel + 90 ° Included Angle + Right Hand Cut + Double End, sorted by Drill Size, custom
Loading... |
Center Drills with Bell Tip
Bell-tip center drills create a hole at the center of a piece of stock so it can be turned between centers on a lathe. They have an additional 120° chamfer on their tip that bevels the outer edge of the center hole to strengthen it and help protect the hole from damage in applications where the piece of stock will go through multiple machining passes and there is risk of marring the edges of the center hole.
Carbide + 60 ° Included Angle + Right Hand Cut + Double End
Center Drills with Bell Tip Carbide + 60 ° Included Angle + Right Hand Cut + Double End, sorted by Drill Size, custom
Loading... |
Cobalt + 60 ° Included Angle + Right Hand Cut + Double End
Center Drills with Bell Tip Cobalt + 60 ° Included Angle + Right Hand Cut + Double End, sorted by Drill Size, custom
Loading... |
High Speed Steel + 60 ° Included Angle + Left Hand Cut + Double End
Center Drills with Bell Tip High Speed Steel + 60 ° Included Angle + Left Hand Cut + Double End, sorted by Drill Size, custom
Loading... |
High Speed Steel + 60 ° Included Angle + Right Hand Cut + Double End
Center Drills with Bell Tip High Speed Steel + 60 ° Included Angle + Right Hand Cut + Double End, sorted by Drill Size, custom
Loading... |
High Speed Steel + 118 ° Included Angle + Right Hand Cut +
Center Drills with Bell Tip High Speed Steel + 118 ° Included Angle + Right Hand Cut +, sorted by Drill Size, custom
Loading... |
Powdered Metal + 60 ° Included Angle + Right Hand Cut + Double End
Center Drills with Bell Tip Powdered Metal + 60 ° Included Angle + Right Hand Cut + Double End, sorted by Drill Size, custom
Loading... |
Center Drills with Radius Tip
Radius-tip center drills have a tapered flute that allows them to create more accurate holes than other styles of center drills. They are commonly used in high-precision applications to create holes at the center of a piece of stock so it can be turned between centers on a lathe.
Carbide + 60 ° Included Angle + Right Hand Cut + Double End
Center Drills with Radius Tip Carbide + 60 ° Included Angle + Right Hand Cut + Double End, sorted by Drill Size, custom
Loading... |
Cobalt + 60 ° Included Angle + Right Hand Cut + Double End
Center Drills with Radius Tip Cobalt + 60 ° Included Angle + Right Hand Cut + Double End, sorted by Drill Size, custom
Loading... |
High Speed Steel + 60 ° Included Angle + Right Hand Cut + Double End
Center Drills with Radius Tip High Speed Steel + 60 ° Included Angle + Right Hand Cut + Double End, sorted by Drill Size, custom
Loading... |
High Speed Steel + 118 ° Included Angle + Right Hand Cut + Double End
Center Drills with Radius Tip High Speed Steel + 118 ° Included Angle + Right Hand Cut + Double End, sorted by Drill Size, custom
Loading... |
Hey-Type Center Drills with Bell Tip
Hey-type center drills with a bell tip have flats on their end that accept carbide inserts. They can be used on Hey machines for facing a workpiece and creating center holes on it so it can be turned between centers on a lathe. The drills have a bell tip with an additional 120° chamfer that bevels the outer edge of the hole to help protect the hole from damage during machining applications. Bell-tip center drills are commonly used in applications where parts will go through multiple machining passes and there is risk of marring the edges of the center hole. These center drills have set screw flats for locking the center drills into the tool holder.
High Speed Steel + 60 ° Included Angle + Right Hand Cut + Double End
Hey-Type Center Drills with Bell Tip High Speed Steel + 60 ° Included Angle + Right Hand Cut + Double End, sorted by Drill Size, custom
Loading... |
Hey-Type High-Speed Steel Center Drills with Plain Tip
Hey-type high-speed steel center drills with a plain tip have flats on their end that accept carbide inserts. They can be used on Hey machines for facing a workpiece and creating center holes on it so it can be turned between centers on a lathe. High-speed steel center drills provide good wear resistance in a wide range of machining applications. These center drills have set screw flats for locking the center drills into the tool holder.
High Speed Steel + 60 ° Included Angle + Right Hand Cut + Double End
Hey-Type High-Speed Steel Center Drills with Plain Tip High Speed Steel + 60 ° Included Angle + Right Hand Cut + Double End, sorted by Drill Size, custom
Loading... |